CHAPTER 6
Cable Specifications
•
Network Cable Specifications for EX2200 Switches on page 77
Network Cable Specifications for EX2200 Switches
EX2200 switches have interfaces that use various types of network cables.
For instructions on connecting the switch to a network for out-of-band management
using an Ethernet cable with an RJ-45 connector, see “Connecting a Switch to a Network
for Out-of-Band Management” on page 127.
For instructions on connecting the switch to a management console using an Ethernet
cable with an RJ-45 connector, see “Connecting a Switch to a Management Console” on
page 129.
For instructions on connecting a fiber-optic cable to the switch, see “Connecting a
Fiber-Optic Cable to a Switch” on page 133.
Related
Documentation
• Management Port Connector Pinout Information for an EX2200 Switch on page 25
• Console Port Connector Pinout Information for an EX Series Switch on page 23
• EX2200 Switches Hardware Overview on page 3
77Copyright © 2015, Juniper Networks, Inc.
To Next Page
Loading...
