Juniper EX2200 User Manual

Figure 26: Attaching a Cable Guard to an EX2200-C Switch
g021161
5. (Optional) Attach the standard cable lock to the security slots on the both sides of
the switch
a. Rope the cable to a desk or a rack and set the lock to unlocked position.
b. Insert the lock into one of the security slot on your chassis and set the lock to the
locked position. See Figure 27 on page 95.
Figure 27: Securing the EX2200-C Switch Using Security Slots
g021160
Security slot
Security cable
Related
Documentation
Connecting AC Power to an EX2200 Switch on page 123•
• Connecting and Configuring an EX Series Switch (CLI Procedure) on page 139
• Wall-Mounting Warnings for EX2200 Switches on page 189
Mounting an EX2200 Switch on Two Posts of a Rack or Cabinet
You can mount all EX2200 switches on two posts of a two-post or a four-post 19-in. rack
or cabinet using the mounting brackets and screws provided with all EX2200 switches
except the EX2200-C switches. For EX2200-C switches, mounting brackets and screws
95Copyright © 2015, Juniper Networks, Inc.
Chapter 8: Installing the Switch

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g