Juniper EX2200 User Manual

Table 18: Optical interface Support for Fast Ethernet SFP Transceivers in EX2200 Switches
Except EX2200-C Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-1FE-LXModel number100BASE-LX
100 MbpsRate
LCConnector type
DualFiber count
1310 nmTransmitter wavelength
–15 dBmMinimum launch power
–8 dBmMaximum launch power
–31.5 dBmMinimum receiver sensitivity
–8 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
10 km (6.2 miles)Distance
Junos OS for EX Series switches, Release 11.2 or laterSoftware required
NoSupport for Virtual Chassis
configuration
47Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Component Specifications

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g