Juniper EX2200 User Manual

Table 18: Optical interface Support for Fast Ethernet SFP Transceivers in EX2200 Switches
Except EX2200-C Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-1FE-LX40KModel number100BASE-LX40K
100 MbpsRate
LCConnector type
DualFiber count
1310 nmTransmitter wavelength
–5 dBmMinimum launch power
0 dBmMaximum launch power
–32 dBmMinimum receiver sensitivity
–8 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
40 km (24.8 miles)Distance
Junos OS for EX Series switches, Release 11.2 or laterSoftware required
NoSupport for Virtual Chassis
configuration
Copyright © 2015, Juniper Networks, Inc.50
Complete Hardware Guide for EX2200 Ethernet Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g