Juniper EX2200 User Manual

Table 19: Optical interface Support and Copper Interface Support for SFP Transceivers in
EX2200-C Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-1FE-FX-EXModel numberExtended Temp SFP
100BASE-FX
1000 MbpsRate
LCConnector type
–Fiber count
–Transmitter wavelength
–Minimum launch power
–Maximum launch power
–Minimum receiver sensitivity
–Maximum input power
MMFFiber type
–Core/Cladding size
–Modal bandwidth
1310 nmTransmitter wavelength
2 km (1.2 miles)Distance
Junos OS for EX Series switches, Release 11.3 or laterSoftware required
YesSupport for Virtual Chassis
configuration
Copyright © 2015, Juniper Networks, Inc.54
Complete Hardware Guide for EX2200 Ethernet Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g