Juniper EX2200 - Page 73

Table 19: Optical interface Support and Copper Interface Support for SFP Transceivers in
EX2200-C Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-1GE-LHModel number1000BASE-LH (or
1000BASE-ZX)
1000 MbpsRate
LCConnector type
DualFiber count
1550 nmTransmitter wavelength
–2 dBmMinimum launch power
5 dBmMaximum launch power
–25 dBmMinimum receiver sensitivity
–3 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
70 km (43.5 miles)Distance
Junos OS for EX Series switches, Release 11.3 or laterSoftware required
YesSupport for Virtual Chassis
configuration
Related
Documentation
• EX2200 Switches Hardware Overview on page 3
• Installing a Transceiver in an EX Series Switch on page 113
• Removing a Transceiver from a Switch on page 149
57Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Component Specifications