Juniper EX4300 Series

Table 45: AC Power Cord Specicaons for 1100 W AC Power Supplies for EX4300 Switches and
1400 W AC Power Supplies for EX4300-48MP and EX4300-48MP-S Switches (Connued)
Country/Region Electrical Specicaons Plug Standards Juniper Model Number
Japan 125 VAC, 15 A, 50 Hz or
60 Hz
JIS 8303 Type 498GJ CBL-PWR-C15M-HITEMP-JP
Korea 250 VAC, 10 A, 50 Hz CEE (7) VII Type VIIG CBL-PWR-C15M-HITEMP-
KR
South Africa 250 VAC, 10 A, 50 Hz SABS 164/1:1992 Type ZA/3 CBL-PWR-C15M-HITEMP-
SA
North America 125 VAC, 15 A, 60 Hz NEMA 5-15 Type N5/15 CBL-PWR-C15M-HITEMP-
US
Switzerland 250 VAC, 10 A, 50 Hz SEV 1011 / 6534-2 Type
12G
CBL-PWR-C15M-HITEMP-
SZ
United
Kingdom
250 VAC, 10 A, 50 Hz BS 1363/A Type BS89/13 CBL-PWR-C15M-HITEMP-
UK
CAUTION: The AC power cord for the EX4300 switch is intended for use with this
switch only. Do not use the cord with any other product.
CAUTION: Power cords must not block access to switch components.
SEE ALSO
Connecng AC Power to an EX4300 Switch | 196
110