Juniper EX4300 Series

l3-interface irb.0;
}
}
The following is the factory-default conguraon le for an EX4300-48T switch with 48 ports without
PoE capability that runs a version of Junos OS release earlier than 18.3R3.
system {
auto-snapshot;
syslog {
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
commit {
factory-settings {
reset-virtual-chassis-configuration;
reset-chassis-lcd-menu;
}
}
}
interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching;
vlan {
members default;
}
storm-control default;
}
}
}
ge-0/0/1 {
unit 0 {
family ethernet-switching;
231