Juniper EX4300 Series

Table 73: Status of a Member Switch in a Virtual Chassis
If the member switch is It appears as It means the member switch
Present Prsnt Has established physical and logical connecons with Virtual Chassis
member switches.
Not present dimmed and
NotPrsnt
Has been disconnected from the exisng Virtual Chassis.
Inacve dimmed and
Inacve
Has established physical connecons, but is unable to establish logical
connecons.
Not provisioned dimmed and
Unprvsnd
Cannot synchronize with the exisng preprovisioned Virtual Chassis.
Click Rear View for a graphical view of the rear panel of the switch.
Click Preferences to choose which panels must be displayed and set the refresh interval for chassis
viewer informaon. Click OK to save your changes and return to the dashboard or click Cancel to return
to the dashboard without saving changes.
NOTE: You can drag the various panels to dierent locaons in the J-Web window.
259