Juniper EX4300 Series

• Starng in Junos OS Release 22.3R1 which aligns with the J-Web Applicaon package release
22.3A1, J-Web supports EX4400 switches. For EX4400 switches, chassis viewer supports
both the standalone view and Virtual Chassis conguraon.
• Starng in Junos OS Release 22.4R1 which aligns with the J-Web Applicaon package release
22.4A1, J-Web supports EX4100 and EX4100-F switches. For EX4100 and EX4100-F
switches, chassis viewer supports both the standalone view and Virtual Chassis conguraon.
Table 72 on page 258 lists the details that are displayed on each member switch.
Table 72: Details of a Virtual Chassis Member Switch
Details Example
Model number of the member switch EX3300
Assigned ID that applies to the enre Virtual
Chassis conguraon
ID 2
NOTE: If the member switch is not provisioned, the serial
number of the switch is displayed instead of its ID.
Role of the member switch Master
Possible roles are: Master, Backup, or Linecard
Status of the member switch Prsnt
Possible statuses are: Prsnt, NotPrsnt, Inacve, or Unprvsnd
The status of the member switch is displayed on the image of the switch. If the member switch appears
dimmed, it means the switch is not present, is inacve, or is not provisioned in the Virtual Chassis. If the
member switch does not appear dimmed, it means the switch is present and is acve.
Table 73 on page 259 describes the possible status of a member switch.
258