Table 5: Uplink Modules for 32-Port EX4300 Switches
(Connued)
Uplink Module Descripon Supported EX4300
Switch Models
First
Junos OS
Release
8-port 1-Gigabit
Ethernet/
10-Gigabit Ethernet
SFP+ uplink module
(model number:
EX-UM-8X8SFP)
The 8-port 1-Gigabit Ethernet/
10-Gigabit Ethernet SFP+ uplink module can
house up to eight SFP transceivers, SFP+
transceivers, or a combinaon of SFP and SFP+
transceivers. You can also congure the ports on
this module as VCPs and use them to connect
the switch in a Virtual Chassis or a VCF
conguraon by using SFP+ transceivers.
• EX4300-32F
• EX4300-32F-DC
13.2X51-
D15
• EX4300-32F-S
13.2X51-
D26
Table 6: Uplink Modules for EX4300-48MP and EX4300-48MP-S Switches
Uplink Module Descripon Supported EX4300 Switch
Models
First Junos OS Release
2-port 40-Gigabit
Ethernet QSFP+/100-
Gigabit Ethernet QSFP28
uplink module (model
number:
EX-UM-2QSFP-MR)
You can install two QSFP
+ transceivers, two
QSFP28 transceivers, or
a combinaon of one
QSFP+ transceiver and
one QSFP28 transceiver
in this uplink module.
NOTE: You cannot
congure the ports on
the uplink module in
EX4300-48MP and
EX4300-48MP-S
switches as Virtual
Chassis ports (VCPs).
• EX4300-48MP
• EX4300-48MP-S
18.4R1
NOTE: Starng in
Junos OS Release
19.3R1, you can install
two 100-Gigabit Ethernet
QSFP28 transceivers in
the uplink module. In
Junos OS Release 18.4R1
through Junos OS
Release 19.2R1, the
uplink module supported
only one 100-Gigabit
Ethernet transceiver. If
you congure both the
ports on the uplink
module to operate at
100-Gbps speed, the four
QSFP+ ports on the
switch are disabled.
20