ACCT_MALLOC_FAILURE
System Log Message Memory allocation failed while reallocating filter profile interface list
Description The accounting statistics process could not allocate memory from the heap.
Type Error: An error occurred
Severity error
Facility LOG_PFE
Cause An internal software failure occurred.
Action Contact your technical support representative.
ACCT_UNDEFINED_COUNTER_NAME
System Log Message Counter profile-name in accounting profile counter-name is not defined in a firewall using
this filter profile
Description The indicated filter profile referenced the indicated counter name, which is not defined
in a firewall filter that uses the filter profile.
Type Error: An error occurred
Severity warning
Facility ANY
Action Change the filter profile counter name to match the name defined in the firewall
configuration.
ACCT_XFER_FAILED
System Log Message Error transferring filename
Description An attempt to transfer the indicated file failed.
Type Error: An error occurred
Severity error
Facility LOG_PFE
ACCT_XFER_POPEN_FAIL
System Log Message Error error-code in invoking command command to transfer file filename
Description A call to the popen() function failed when the accounting statistics process invoked the
indicated command to transfer the indicated file.
Type Error: An error occurred
Severity error
57Copyright © 2010, Juniper Networks, Inc.
Chapter 2: ACCT System Log Messages
To Next Page
Loading...