Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 30
FPCLOGIN System Log Messages
This chapter describes messages with the FPCLOGIN prefix. They are generated by the
Flexible PIC Concentrator (FPC) login process (pimlogin), which provides direct login
access to Physical Interface Modules (PIMs).
FPCLOGIN_ADDRESS_GET_FAILED
System Log Message Unable to determine IP address of TGM in slot slot
Description A user tried to log in to the Physical Interface Module (PIM) in the indicated slot on a
Flexible PIC Concentrator (FPC). In response, the FPC login process (pimlogin) tried to
determine the PIM's IP address. It could not do so, and the login attempt failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
FPCLOGIN_IPC_RECEIVE_FAILED
System Log Message Unable to receive IPC message from process-name
Description The Flexible PIC Concentrator (FPC) login process (pimlogin) could not process an
interprocess communication (IPC) message from the indicated other process. The 'wxd'
process is the WX Physical Interface Module process.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
FPCLOGIN_IPC_SEND_FAILED
System Log Message Unable to send IPC message to process-name
Description The Flexible PIC Concentrator (FPC) login process (pimlogin) could not send an
interprocess communication (IPC) message to the indicated other process. The 'wxd'
process is the WX Physical Interface Module process (wxd).
Type Error: An error occurred
269Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English