Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 64
PFE System Log Messages
This chapter describes messages with the PFE prefix. They are generated by the Packet
Forwarding Engine controller, which manages packet forwarding functions.
PFE_ANALYZER_CFG_FAILED
System Log Message Error in Analyzer error-message for index = index error-code = error-code
Description The configuration analyzer terminated because an error occured during the configuration.
Type Error: An error occurred
Severity error
Facility ANY
PFE_ANALYZER_SHIM_CFG_FAILED
System Log Message Error in Analyzer error-message for index = index error-code = error-code
Description The configuration analyzer terminated because an error occured while the chip was being
programmed.
Type Error: An error occurred
Severity error
Facility ANY
PFE_ANALYZER_TABLE_WRITE_FAILED
System Log Message index Could not create analyzer error-message table
Description The logical interfaces (ifl) index failed to configure the analyzer because of an error.
Type Error: An error occurred
Severity error
Facility ANY
PFE_ANALYZER_TASK_FAILED
System Log Message Following task failed : error-message
459Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English