Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 57
LRMUX System Log Messages
This chapter describes messages with the LRMUX prefix. They are generated by the
logical router multiplexer process (lrmuxd), which manages the multiple instances of
the routing protocols process (rpd) on a machine running logical routers.
LRMUX_FAILED_EXEC
System Log Message Failed to exec command
Description The Logical System Multiplexer process (lrmuxd) issued the exec() system call to start
a routing process (rpd) to check the validity of the configuration. The system call failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
LRMUX_LRPD_PID_LOCK
System Log Message Lock not found on PID file filename
Description The Logical System Multiplexer process (lrmuxd) could not find a lock for a logical system.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause A logical system process (rpd) died.
LRMUX_LRPD_PID_OPEN
System Log Message Unable to open PID file filename
Description The Logical System Multiplexer process (lrmuxd) could not open the indicated PID lock
file for a logical system process (rpd).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
439Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English