Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 39
JCS System Log Messages
This chapter describes messages with the JCS prefix. They are generated by the Juniper
Control System (jcsd) process which provides the user interface to the control processes
for the management modules and switch modules in the JCS 1200 platform.
JCS_BBD_LOAD_FAILURE
System Log Message Blade slot load BBD falure: error-message
Description The JCS process (jcsd) could not load blade bay data for the specified blade.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_BBD_LOCAL_MISMATCH
System Log Message Blade slot BBD error-message mismatch (expected-value != received-value)
Description The blade bay data retrieved for the specified blade does not match the data loaded
during the reboot process. This error usually indicates that blade bay data in the JCS
Management Module was changed since the last reboot.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_BBD_NOT_FOUND
System Log Message Blade slot bay data not found
Description Blade bay data was not found for the specified blade.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
305Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English