Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

JCS_BBD_NOT_VALID
System Log Message Blade slot BBD is invalid
Description The blade bay data for the specified blade is invalid.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_BBD_PARSE_ERROR
System Log Message Blade slot bay data parse error - error-message
Description The blade bay data for the specified blade did not parse correctly.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_BBD_PEER_MISMATCH
System Log Message Peer blade slot BBD error-message mismatch (expected-value != received-value)
Description The blade bay data retrieved for the specified peer blade does not match the data
retrieved for the local blade. This error indicates that blade bay data in the JCS
Management Module was not configured properly.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_BBD_SYSTEM_CONFLICT
System Log Message Local BBD error-message (value) conflicts with blade slot
Description The blade bay data retrieved for the local blade conflicts with another blade in the JCS.
This error indicates that blade bay data in the JCS Management Module was not
configured properly.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
JCS_EXT_LINK_STATE
System Log Message Switch slot EXT link state is state
Description The JCS process (jcsd) detects a change of state for the external link of the indicated
switch module.
Copyright © 2010, Juniper Networks, Inc.306
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English