Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 32
FUD System Log Messages
This chapter describes messages with the FUD prefix. They are generated by the UDP
forwarding process (fud), which forwards UDP (User Datagram Protocol) packets from
a network to a server for services that run over UDP.
FUD_ARGUMENT_FAILURE
System Log Message Unknown option "option"
Description One or more options provided on the 'fud' command line were invalid. The UDP forwarding
process (fud) initialized but ignored the invalid options.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Reissue the 'fud' command with the correct options.
FUD_BAD_SERVER_ADDR_FAILURE
System Log Message Destination address of destination-address is invalid
Description One or more server addresses configured for the UDP forwarding process (fud) were
invalid.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Reconfigure the fud process with valid server addresses.
FUD_BIND_FAILURE
System Log Message bind(port port) failed: error-message
Description The UDP forwarding process (fud) received the indicated error when it tried to bind a
socket to a local address.
Type Error: An error occurred
281Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English