Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 43
KMD System Log Messages
This chapter describes messages with the KMD prefix. They are generated by the key
management process (kmd), which provides IP Security (IPSec) authentication services
for encryption PICs.
KMD_CFG_IF_ID_POOL_NOT_FOUND
System Log Message Unable to allocate logical interface for IPSec interface from pool pool-name: pool not
found
Description The key management process (kmd) maintains pools of logical interfaces for assignment
to IP Security (IPSec) interfaces. It could not allocate a logical interface, because it could
not access the indicated pool.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_CFG_IF_ID_POOL_NO_ENTRY
System Log Message Unable to return logical interface interface-name.interface-unit to pool pool-name: no
entry in pool for interface
Description The key management process (kmd) maintains pools of logical interfaces for assignment
to IP Security (IPSec) interfaces. It could not return the indicated logical interface to the
indicated pool, because there was no entry for the interface in the pool.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_CFG_IF_ID_POOL_NO_INTERFACE
System Log Message Unable to allocate logical interface for IPSec interface from pool pool-name: no interfaces
available
Description The key management process (kmd) maintains pools of logical interfaces for assignment
to IP Security (IPSec) interfaces. It could not allocate a logical interface, because none
were available in the indicated pool.
325Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English