Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 53
LICENSE System Log Messages
This chapter describes messages with the LICENSE prefix. They are generated by
processes that call routines in the liblicense library, which provide software license
management functions on a routing platform.
LICENSE_CONNECT_FAILURE
System Log Message Connection could not be set up: error-message
Description The indicated error occured because a connection to the license-check process was not
established.
Type Error: An error occurred
Severity error
Facility ANY
LICENSE_CONN_TO_LI_CHECK_FAILURE
System Log Message Process could not connect to license-check in maximum-value tries; giving up
Description The indicated process failed to connect to the license-check process after the indicated
maximum tries.
Type Error: An error occurred
Severity error
Facility ANY
LICENSE_CONN_TO_LI_CHECK_SUCCESS
System Log Message Connected to license-check
Description The indicated process succesfully connected to the license-check process.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
423Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English