Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 24
DHCPD System Log Messages
This chapter describes messages with the DHCPD prefix. They are generated by the
Dynamic Host Configuration Protocol (DHCP) server process (dhcpd) for J Series Services
Routers, which automatically allocates network IP addresses and delivers configuration
settings to client hosts in a Transmission Control Protocol (TCP)/IP network.
DHCPD_BIND_FAILURE
System Log Message bind() to port port failed: error-message
Description The Dynamic Host Configuration Protocol server process (dhcpd) received the indicated
error when it tried to bind a socket to the indicated local port.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Action Contact your technical support representative.
DHCPD_DEGRADED_MODE
System Log Message Running in degraded mode because of reason: error-message
Description The Dynamic Host Configuration Protocol server process (dhcpd) began running in
degraded mode because the indicated unrecoverable error occurred.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Cause There might be a problem with the lease cache directory used to store persistent lease
information.
Action Contact your technical support representative.
DHCPD_MEMORY_ALLOCATION_FAILURE
System Log Message Unable to allocate memory for object-name: error-message
239Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English