Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 81
SNMP System Log Messages
This chapter describes messages with the SNMP prefix. They are generated by two kinds
of processes:
•
Processes that perform SNMP operations, such as the MIB II process (mib2d) and the
SNMP agent process (snmpd). Those processes also generate messages with prefixes
that match their names, as described in “MIB2D System Log Messages” on page 373
and “SNMPD System Log Messages” on page 513.
•
Processes that are instrumented to generate system log messages when they send
SNMP traps. The SNMP remote operations process (rmopd) is one such process. It
also generates messages with the RMOPD_ prefix, which are described in “RMOPD
System Log Messages” on page 419.
SNMP_GET_ERROR1
System Log Message function-name operation failed for object-name: index1 index1 (error-message)
Description An SNMP Get or GetNext request failed for the indicated object, which has the indicated
index.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
SNMP_GET_ERROR2
System Log Message function-name operation failed for object-name: index1 index1 index2 index2
(error-message)
Description An SNMP Get or GetNext request failed for the indicated object, which has the indicated
indexes.
Type Error: An error occurred
595Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English