Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010

CHAPTER 67
PING System Log Messages
This chapter describes messages with the PING prefix. They are generated by the ping
command, which tests whether a remote machine is accessible across the network.
PING_EGRESS_JITTER_THRESH_EXCEED
System Log Message pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
Description The jitter for the egress trip time exceeded the configured threshold during the indicated
test conducted by the indicated user.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
PING_EGRESS_STDDEV_THRESH_EXCEED
System Log Message pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
Description The standard deviation of the egress trip time exceeded the configured threshold during
the indicated test conducted by the indicated user.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
PING_EGRESS_THRESHOLD_EXCEEDED
System Log Message pingCtlOwnerIndex = test-owner, pingCtlTestName = test-name
Description The egress trip time measured for a probe exceeded the configured threshold during the
indicated test conducted by the indicated user.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
473Copyright © 2010, Juniper Networks, Inc.