Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 70
PROFILER System Log Messages
This chapter describes messages with the PROFILER prefix. They are generated by the
profiler service process (profilerd) which captures accurate and granular detail of the
traffic pattern over a specific time period. The profiler process provides details on the
threats are encountered by the network as well as details about the mix of application
traffic.
PROFILER_RECONFIGURE_SIGHUP
System Log Message SIGHUP - re-reading configuration
Description In response to a SIGHUP signal, the profiler service process (profilerd) read its
configuration from the configuration database
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
487Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English