CHAPTER 48
LFMD System Log Messages
This chapter describes messages with the LFMD prefix. They are generated by the link-fault
management process (lfmd), which supports Operation, Administration, and Maintenance
(OAM) functions that are defined in the Institute of Electrical and Electronics Engineers
(IEEE) 802.3ah standard for Ethernet interfaces.
LFMD_RTSOCK_OPEN_FAILED
System Log Message Unable to open synchronous routing socket: error-message
Description The Ethernet Operation, Administration and Management link-fault management process
(lfmd) could not open a routing socket to create a connection.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
401Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...