CHAPTER 36
ICCPD System Log Messages
This chapter describes messages with the ICCPD prefix. They are generated by the
interchassis communication process (iccpd).
ICCPD_ASSERT_SOFT
System Log Message Soft assertion failed at line line-number in file 'source-filename' with error "message",
but iccpd with PID pid continued running
Description The source code for the interchassis communication process (iccpd) includes internal
self-consistency checks. As the iccpd process with the indicated process ID (PID) executed
the binary compiled from the indicated source file, a check failed at the indicated line
number in the file. The iccpd process created a diagnostic core file for analysis by technical
support personnel and continued to run.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Examine the messages that immediately follow this message in the system log for
information about possible causes. Contact a technical support representative, and be
ready to provide the list of messages and the diagnostic core file, if requested.
ICCPD_OPEN_ERROR
System Log Message error-message: open error on pipe
Description The interchassis communication process (iccpd) could not initialize.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
295Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...