Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 46
L2TPD System Log Messages
This chapter describes messages with the L2TPD prefix. They are generated by the Layer
2 Tunneling Protocol (L2TP) process (l2tpd), which provides services that enable tunneling
of Point-to-Point Protocol (PPP) sessions across a Layer 3 IP network.
L2TPD_COS_PROFILE_ADD
System Log Message Unable to add CoS profile profile-name (L2TP tunnel tunnel-id, session session-id):
error-message
Description The Layer 2 Tunneling Protocol process (l2tpd) could not add the indicated
class-of-service (CoS) profile to the indicated session on the indicated tunnel, which is
associated with a user.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
Action Remove the CoS profile from the RADIUS database or contact your technical support
representative.
L2TPD_COS_PROFILE_DELETE
System Log Message Unable to delete CoS profile (L2TP tunnel tunnel-id, session session-id): error-message
Description The Layer 2 Tunneling Protocol process (l2tpd) could not delete a class-of-service (CoS)
profile from the indicated session on the indicated tunnel, which is associated with a
user.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
Action Remove the CoS profile from the RADIUS database or contact your technical support
representative.
369Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English