CHAPTER 49
LIBESPTASK System Log Messages
This chapter describes messages with the LIBESPTASK prefix.
LIBESPTASK_SNMP_CONN_PROG
System Log Message function-name: error-message
Description The indicated error occurred while the process using libesptask was connecting to the
Simple Network Management Protocol (SNMP) master agent.
Type Error: An error occurred
Severity info
Facility ANY
LIBESPTASK_SNMP_CONN_QUIT
System Log Message function-name: unable to connect to SNMP agent (pathname): error-message
Description The process using libesptask could not connect to the indicated Simple Network
Management Protocol (SNMP) master agent.
Type Error: An error occurred
Severity error
Facility ANY
LIBESPTASK_SNMP_CONN_RETRY
System Log Message function-name: reattempting connection to SNMP agent (pathname): error-message
Description The process using libesptask tried again to connect to the indicated Simple Network
Management Protocol (SNMP) master agent after a connection attempt failed.
Type Error: An error occurred
Severity error
Facility ANY
LIBESPTASK_SNMP_INVALID_SOCKET
System Log Message function-name: socket file-descriptor is invalid
403Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...