Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 25
DYNAMIC System Log Messages
This chapter describes messages with the DYNAMIC prefix. They are generated by the
Access Manager client which is used in the dynamic VPN feature. The dynamic VPN
feature further simplifies remote access by enabling users to establish Internet Protocol
Security (IPsec) VPN tunnels without having to manually configure VPN settings on their
PCs or laptops. Instead, authenticated users can simply download the Access Manager
Web client to their computers. This Layer 3 remote access client uses client-side
configuration settings that it receives from the server to create and manage a secure
end-to-site VPN tunnel to the server.
DYNAMIC_VPN_AUTH_CONNECT_FAIL
System Log Message Unable to connect to fwauthd on socket file-descriptor: error-message
Description The connection manager authentication process could not connect to fwauthd daemon
on the indicated socket.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_AUTH
DYNAMIC_VPN_AUTH_FAIL
System Log Message Username/password and token are username
Description The connection manager authentication process was unable to authenticate the indicated
user/token
Type Event: This message reports an event, not an error
Severity error
Facility LOG_AUTH
DYNAMIC_VPN_AUTH_INVALID
System Log Message type username is invalid
Description The connection manager authentication failed due to invalid user/token
Type Event: This message reports an event, not an error
243Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English