DHCPD_SETSOCKOPT_FAILURE
System Log Message setsockopt(socket-option) failed: error-message
Description The Dynamic Host Configuration Protocol server process (dhcpd) could not set the
indicated socket option.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Action Contact your technical support representative.
DHCPD_SOCKET_FAILURE
System Log Message socket(arguments) failed: error-message
Description The Dynamic Host Configuration Protocol server process (dhcpd) could not create a
socket.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Action Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.242
Junos 10.3 System Log Messages Reference
To Next Page
Loading...