Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 93
WEB System Log Messages
This chapter describes messages with the WEB prefix. They are generated by the Hypertext
Transfer Protocol process (httpd), which provides a graphical user interface (GUI) for
monitoring and configuring J Series Services Routers.
WEB_AUTH_FAIL
System Log Message Unable to authenticate httpd client (username username)
Description The checklogin authentication process could not authenticate the indicated user.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_AUTH
WEB_AUTH_SUCCESS
System Log Message Authenticated httpd client (username username)
Description The checklogin authentication process authenticated the indicated user.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_AUTH
WEB_AUTH_TIME_EXCEEDED
System Log Message Login attempt exceeded maximum processing time
Description The checklogin process halted a login attempt because it took longer than the maximum
processing time allowed.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
WEB_CERT_FILE_NOT_FOUND
System Log Message Could not find certificate file 'filename', disabling HTTPS
669Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English