Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 38
JADE System Log Messages
This chapter describes messages with the JADE prefix. They are generated by the Junos
XML protocol authentication process (jade), which authenticates and checks authorization
of client applications using the Junos XML management protocol.
JADE_ATTRIBUTES_TOO_LONG
System Log Message Attribute number or length in client junoscript tag was too large
Description The JUNOScript client passed too many attributes in the initial <junoscript> tag, or the
attributes were too long.
Type Error: An error occurred
Severity error
Facility ANY
JADE_AUTH_FAILURE
System Log Message Authentication failed for user 'username' : error-message
Description The username or password supplied by the client was incorrect.
Type Error: An error occurred
Severity notice
Facility ANY
JADE_AUTH_SUCCESS
System Log Message Authentication succeded for user 'username'
Description The jade authentication process authenticated the indicated user.
Type Event: This message reports an event, not an error
Severity notice
Facility ANY
JADE_EXEC_ERROR
System Log Message CLI xml-mode exec error: error-message
303Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English