Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 62
NSD System Log Messages
This chapter describes messages with the NSD prefix. They are generated by the network
security process (nsd), which manages firewall configuration on routers running Junos
OS with enhanced services.
NSD_MEMORY_ALLOC_FAILED
System Log Message Unable to allocate count bytes of memory
Description The network security process (nsd) could not allocate the indicated number of bytes of
memory.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause It is possible that system memory is exhausted.
Action Increase the amount of RAM in the Routing Engine.
NSD_RESTART_COMP_CFG_READ_FAILED
System Log Message Subcomponent could not read configuration database
Description As the network security process (nsd) restarted, one or more of its subcomponents could
not read its configuration information from configuration database. The nsd process
restarted anyway, and routing performance was not affected.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
NSD_SEC_NODE_COMP_SYNC_FAILED
System Log Message One or more subcomponents could not sync their state on backup RE
Description One or more subcomponents of the network security process (nsd) failed to synchronize
their state when the nsd restarted on secondary mode.
455Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English