CHAPTER 34
GPRSD System Log Messages
This chapter describes messages with the GPRSD prefix. They are generated by the
general packet radio service process (gprsd) that integrates with existing GSM networks
and offers mobile subscribers with packet switched data services access to corporate
networks and the Internet.
GPRSD_MEMORY_ALLOC_FAILED
System Log Message Unable to allocate count bytes of memory
Description The general packet radio service daemon process (gprsd) could not allocate the indicated
number of bytes of memory.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause It is possible that system memory is exhausted.
Action Increase the amount of RAM in the Routing Engine.
GPRSD_RESTART_CCFG_READ_FAILED
System Log Message Subcomponent could not read configuration database
Description As the general packet radio service daemon process (gprsd) restarted, one or more of
its subcomponents could not read its configuration information from the configuration
database. The gprsd process restarted regardless without affecting routing performance.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
291Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
