Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 75
RTLOG System Log Messages
This chapter describes messages with the RTLOG prefix. They are generated on routers
running the Junos OS with enhanced services by the system log module of the Packet
Forwarding Engine as it processes packets for security control in real time.
RTLOG_JLOG_TEST
System Log Message JLOG test OK, jlog_handle=current-value
Description Test JSF Log plugin registration.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RTLOG_UTP_TCP_SYN_FLOOD
System Log Message source: source-address-source-port, destination: destination-address-destination-port,
zone name: filter-name, interface name: interface-name
Description Security LOG UTP fake TCP SYN flood attack.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_PFE
581Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English