CHAPTER 4
ANCPD System Log Messages
This chapter describes messages with the ANCPD prefix. They are generated by the
Access Node Control Protocol process (ancpd), also known as Layer 2 control (l2c),
which works with a special Internet Group Management Protocol (igmp) session to
collect outgoing interface (oif) mapping events in a scalable manner.
ANCPD_COMMAND_OPTIONS
System Log Message ancpd_cmd_opts called with option index arg argument
Description ancpd process cmd line options not handled by junos_app_init
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
65Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...