CHAPTER 13
AUTOD System Log Messages
This chapter describes messages with the AUTOD prefix. They are generated by the
autoinstallation process (autod), which controls the initialization of J Series Services
Routers.
AUTOD_BIND_FAILURE
System Log Message Unable to bind address to socket: error-message
Description The autoinstallation process (autod) received the indicated error when it tried to bind a
socket to an address.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
AUTOD_HOSTNAME_EXPANSION_FAILURE
System Log Message Unable to expand compressed DNS domain name: error-message
Description The autoinstallation process (autod) received the indicated error when it tried to expand
a compressed Domain Name System (DNS) domain name.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
AUTOD_RECV_FAILURE
System Log Message Unable to receive on socket: error-message
Description The autoinstallation process (autod) received the indicated error when it tried to receive
data on a socket.
Type Error: An error occurred
113Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...