Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 16
BOOTPD System Log Messages
This chapter describes messages with the BOOTPD prefix. They are generated by the
boot parameter process (tnp.bootpd), which provides the appropriate boot string to
hardware components as they initialize.
BOOTPD_ARG_ERR
System Log Message Ignoring unknown option -option
Description The indicated option was provided on the 'tnp.bootpd' command line and is invalid. The
boot parameter process (tnp.bootpd) initialized but ignored the invalid option.
Type Error: An error occurred
Severity warning
Facility ANY
Action Remove the invalid option from the 'tnp.bootpd' command line.
BOOTPD_BAD_ID
System Log Message Unexpected ID 0xassembly-id
Description As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). The boot strings are defined in the
configuration file tnp.bootpd. A request failed because it included the indicated assembly
ID, for which there is no definition in the file.
Type Event: This message reports an event, not an error
Severity notice
Facility ANY
BOOTPD_BOOTSTRING
System Log Message Boot string: boot-string
Description As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). tnp.bootpd responded with the indicated
boot string.
123Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English