Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 59
MIB2D System Log Messages
This chapter describes messages with the MIB2D prefix. They are generated by the
Management Information Base II (MIB II) process (mib2d), which services requests for
information gathered and reported by the Simple Network Management Protocol (SNMP).
MIB2D_ATM_ERROR
System Log Message function-name: error-message
Description The MIB II process (mib2d) could not process ATM-related information.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
MIB2D_CONFIG_CHECK_FAILED
System Log Message function-name: configuration database has errors
Description The portion of the candidate configuration related to the MIB II process (mib2d) was
checked for validity during a 'commit' operation. The check failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause The configuration was invalid.
Action Correct the invalid portion of the configuration as described in the error message on the
console.
MIB2D_FILE_OPEN_FAILURE
System Log Message Unable to open file 'filename': error-message
443Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English