CHAPTER 51
LIBJSNMP System Log Messages
This chapter describes messages with the LIBJSNMP prefix. They are generated by the
libjsnmp process.
LIBJSNMP_CTX_FAILURE
System Log Message snmp_ms_trap_api return argument
Description Sub-agents SNMP context either too long or of zero size
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJSNMP_IPC_ERROR
System Log Message argument: sock:port (type:port-type)
Description Error in SNMP related IPC messages size mismatch, corruption or memory failure
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJSNMP_IPC_READ_ERROR
System Log Message Unable to read inbound-bytes bytes: sock: port (type: port-type)
Description Error in reading IPC messages during SNMP related messaging
413Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...