Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 10
AUDITD System Log Messages
This chapter describes messages with the AUDITD prefix. They are generated by the audit
process (auditd), which notifies the RADIUS accounting server of user activity on the
routing platform, such as login, logout, and execution of command-line interface (CLI)
commands.
AUDITD_RADIUS_AV_ERROR
System Log Message Unable to create type record: error-message
Description The audit process (auditd) experienced the indicated error when building RADIUS
attribute-value (AV) pairs for the indicated type of accounting request, which can be a
login or logout event, or a command issued in the CLI.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
AUDITD_RADIUS_OPEN_FAILED
System Log Message function-name: unable to create RADIUS object handle (error-message)
Description The audit process (auditd) could not create a RADIUS object handle, which it uses for
various RADIUS operations.
Type Error: An error occurred
Severity emergency
Facility LOG_DAEMON
AUDITD_RADIUS_REQ_CREATE_FAILED
System Log Message Unable to create RADIUS request: error-message
Description The audit process (auditd) could not create a RADIUS accounting request for the indicated
reason.
Type Error: An error occurred
Severity error
105Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English