Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 74
RT System Log Messages
This chapter describes messages with the RT prefix. They are generated on routers running
the Junos OS with enhanced services by the Packet Forwarding Engine as it processes
packets for security control in real time.
RT_FLOW_SESSION_CLOSE
System Log Message session closed reason: source-address/source-port->destination-address/destination-port
service-name
nat-source-address/nat-source-port->nat-destination-address/nat-destination-port
src-nat-rule-name dst-nat-rule-name protocol-id policy-name source-zone-name
destination-zone-name session-id-32 packets-from-client(bytes-from-client)
packets-from-server(bytes-from-server) elapsed-time
Description A security session was closed.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_FLOW_SESSION_CREATE
System Log Message session created source-address/source-port->destination-address/destination-port
service-name
nat-source-address/nat-source-port->nat-destination-address/nat-destination-port
src-nat-rule-name dst-nat-rule-name protocol-id policy-name source-zone-name
destination-zone-name session-id-32
Description A security session was created.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_FLOW_SESSION_DENY
System Log Message session denied source-address/source-port->destination-address/destination-port
service-name protocol-id(icmp-type) policy-name source-zone-name
destination-zone-name
569Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English