Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description A security session was not permitted by policy.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_GTP_BAD_LICENSE
System Log Message GTP invalid license (gtpP memory-address)
Description The GPRS tunneling protocol (GTP) is not enabled. The user needs to enable GTP to
solve this problem.
Type Error: An error occurred
Severity error
Facility LOG_PFE
RT_GTP_DEL_TUNNEL_V0
System Log Message Delete tunnel for V0 gtp-array-index (tid gtp-mobile-id1gtp-mobile-id2), in
gtp-tunnel-in-count out gtp-tunnel-out-count, duration: duration seconds
Description A GPRS tunneling protocol (GTP) version 0 tunnel was deleted.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_GTP_DEL_TUNNEL_V1
System Log Message Delete tunnel V1 gtp-array-index (SGSN teid gtp-teid), in gtp-tunnel-in-count out
gtp-tunnel-out-count, duration: duration seconds
Description A GPRS tunneling protocol (GTP) version 1 tunnel was deleted.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
RT_GTP_PKT_APN_IE
System Log Message APN IE: name
Description Displays the contents of the Access Point Name (APN) information element carried in
the GPRS tunneling protocol (GTP) message.
Type Event: This message reports an event, not an error
Severity info
Copyright © 2010, Juniper Networks, Inc.570
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English