CHAPTER 33
FWAUTH System Log Messages
This chapter describes messages with the FWAUTH prefix. They are generated by the
process that authenticates users when they initiate a connection across a firewall.
FWAUTH_FTP_LONG_PASSWORD
System Log Message Authentication for user username at client-address was denied (long password).
Description The length of the password must not exceed 128 characters.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
FWAUTH_FTP_LONG_USERNAME
System Log Message Authentication for user username at client-address was denied (long username).
Description The length of the username must not exceed 64 characters.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
FWAUTH_FTP_USER_AUTH_ACCEPTED
System Log Message User username of group group-name at client-address is accepted.
Description The authenticated user can start accessing protected resources.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
FWAUTH_FTP_USER_AUTH_FAIL
System Log Message User username at client-address is rejected.
Description User authentication failed because the username or password was invalid.
287Copyright © 2010, Juniper Networks, Inc.
To Next Page
Loading...