Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 82
SNMPD System Log Messages
This chapter describes messages with the SNMPD prefix. They are generated by the
Simple Network Management Protocol (SNMP) agent process (snmpd), which responds
to SNMP requests. As necessary, it passes the requests to subagent processes running
on its machine and forwards the traps they generate to the SNMP manager.
SNMPD_AUTH_FAILURE
System Log Message function-name: message from source-address to destination-address (index1)
Description The indicated function failed because the authorization check failed for the interface,
Simple Network Management Protocol (SNMP) community, or user making the request.
Type Error: An error occurred
Severity notice
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
SNMPD_AUTH_PRIVILEGES_EXCEEDED
System Log Message function-name: source-address: request exceeded community privileges
Description The indicated function failed because the Simple Network Management Protocol (SNMP)
community making the access request did not have the required privileges.
Type Error: An error occurred
Severity notice
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
599Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English