Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 22
DFCD System Log Messages
This chapter describes messages with the DFCD prefix. They are generated by the dynamic
flow control process (dfcd), which monitors packet flows using dynamically alterable
filtering criteria.
DFCD_FTAP_PIC_UNSUPPORTED
System Log Message PIC housing interface interface-name does not support flow-tap service
Description The Physical Interface Card (PIC) that houses the indicated interface does not support
flow-tap service.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
DFCD_GENCFG_MALLOC_FAILED
System Log Message GENCFG mem alloc failed !!!
Description The dynamic flow capture process (dfcd) could not allocate memory for gencfg message.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
DFCD_GENCFG_WRITE_FAILED
System Log Message GENCFG write failed for Reason: error-message (error-code)
Description The dynamic flow capture process (dfcd) could not send gencfg message, for the
indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
233Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English