Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 298

DFCD_LINH_MALLOC_FAILED
System Log Message GENCFG mem alloc failed !!!
Description The dynamic flow capture process (dfcd) could not allocate memory for linh message.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
DFCD_LI_NEXT_HOP_ADD_FAILED
System Log Message Unable to add li next hop for subscriber interface: error-message (error-code)
Description The dynamic flow capture process (dfcd) could not add a subscriber li next hop, for the
indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
DFCD_NEXT_HOP_ADD_FAILED
System Log Message Unable to add service next hop: error-message (error-code)
Description The dynamic flow capture process (dfcd) could not add a service next hop, for the
indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
DFCD_NEXT_HOP_DELETE_FAILED
System Log Message Unable to delete service next hop: error-message (error-code)
Description The dynamic flow capture process (dfcd) could not delete a service next hop, for the
indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
DFCD_SAMPLE_CLASS_ADD_FAILED
System Log Message Unable to add sample class: error-message (error-code)
Description The dynamic flow capture process (dfcd) could not add a sample class, for the indicated
reason.
Copyright © 2010, Juniper Networks, Inc.234
Junos 10.3 System Log Messages Reference