Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHAPTER 83
SPD System Log Messages
This chapter describes messages with the SPD prefix. They are generated by the adaptive
services process (spd), which provides the user interface for management and
configuration of Adaptive Services PICs.
SPD_CONFIGURATION_COMPILE
System Log Message Compilation of configuration rule rule-name term index failed: reason
Description The adaptive services process (spd) could not compile a configured object, such as a
rule or rule term.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
SPD_CONN_FATAL_FAILURE
System Log Message Connection attempt failed with fatal error: error-message
Description The adaptive services process (spd) attempted to open a connection to an Adaptive
Services PIC, to gather information requested in a Simple Network Management Protocol
(SNMP) query. The attempt failed with the indicated fatal error.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
SPD_CONN_NO_REPLY
System Log Message function-name: no reply from interface-name (error-message)
Description The adaptive services process (spd) did not receive a reply from the indicated interface
on an Adaptive Services PIC for information requested in a Simple Network Management
Protocol (SNMP) query.
Type Error: An error occurred
Severity error
611Copyright © 2010, Juniper Networks, Inc.

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English