Description The Simple Network Management Protocol (SNMP) agent process (snmpd) generated
a warm-start trap when it initialized (other Routing Engine processes were already active).
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
SNMPD_USER_ERROR
System Log Message function-name: error in action user 'username' auth 'authentication-type' priv 'privilege-type'
Description The indicated operation (creation, installation, or deletion) failed during configuration
of the indicated user.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.610
Junos 10.3 System Log Messages Reference
To Next Page
Loading...