Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

SNMPD_TRAP_QUEUE_DRAINED
System Log Message function-name: traps queued to trap-destination sent successfully
Description The queued traps for the indicated destination were successfully sent.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
SNMPD_TRAP_QUEUE_MAX_ATTEMPTS
System Log Message function-name: after count attempts, deleting trap-count traps queued to trap-destination
Description The number of attempts to send traps to the indicated destination exceeded the
configured maximum. The traps still waiting to be sent were discarded.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
SNMPD_TRAP_QUEUE_MAX_SIZE
System Log Message function-name: maximum queue size exceeded (size), discarding trap to trap-destination
from queue-name queue
Description The number of traps in the trap queue exceeded the configured maximum. The traps
still waiting to be sent were discarded.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
SNMPD_TRAP_THROTTLED
System Log Message function-name: traps throttled after count traps
Description The number of traps waiting for transmission exceeded the configured maximum, so the
remaining traps were throttled.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
SNMPD_TRAP_WARM_START
System Log Message function-name: SNMP trap: warm start
609Copyright © 2010, Juniper Networks, Inc.
Chapter 82: SNMPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English